nbc logo (2)
Office address
National Engineering Industries Ltd.
Khatipura Road Jaipur – 302006 Rajasthan, India
Phone Number

Toll Free: 1800 3000 6222
Telephone: +91 141 222 3221
Fax: +91 141 222 1926, 222 2259
CIN: U29130WB1946PLC013643

Bearing Maintenance Training & Tips From The Industry Experts

The bearing maintenance can help in ensuring the long service life which results in optimum performance and prevention from failure. This blog covers various tips from industry experts that can help you do the maintenance of bearing in the right way.
Bearings can be considered an important part of the machinery. If you have ever tried to repair a machine that was not working properly due to worn-out bearings then you know how expensive it is. A broken bearing will always cost more than its replacement, so it is always better to prevent the need for replacements in the first place. This article gives some tips on bearing maintenance training and tips from the Industry Experts.
Why Take Care of Bearing Maintenance
The bearings do carry a huge load and these are small parts that ensure operations within a huge machine. The failure of bearing can become a problematic issue that will result in machine downtime and loss of optimum efficiency. The breakdown of bearings can also cause serious machine or equipment failure.
Bearing Maintenance Training & Tips from The Industry Experts
  1. Inspect Your Bearings Regularly:
    It is essential to inspect your bearings regularly. You must check them at least once every month. Make sure they are clean and free of any debris. If there is dirt or grease around the outer ring, then you should remove it with a rag. You should also make sure that the inner ring is smooth and has no rough spots. If you notice any damage to either the inner or outer ring, then you may need to replace them.

  2. Check All Bearings For Cracks And Leaks:
    When you take apart your machine, check all the bearings. Look at each one carefully, if you see any cracking or leaking, stop using the bearing until you replace it. Don’t just assume that your bearings are fine, even if they seem to be okay.
  3. Check for Loose Parts:
    If you find any loose parts such as nuts, bolts, etc., then you should tighten them up before you start using the equipment. If you don’t do this, then these parts could fall off and cause serious problems.

  4. Grease Replacement:
    If you notice that your bearings are dry, it means that the grease has been completely removed from the bearing. This may indicate that the bearing is damaged. In such cases, you should replace the bearing immediately.

  5. Keep Your Bearings Clean:
    Always keep your bearings clean by removing dirt particles. Use a brush or a vacuum cleaner to remove any dust particles which may get stuck between the races. Make sure to use only a soft bristle brush when cleaning your bearings. Never use metal brushes as they can damage the surface of the bearing.

  6. Inspect the Inner Ring of Your Bearing: When inspecting the inner ring of your bearing, look for signs of damage. Excessive wear or damage to the inner ring of the bearing could cause the outer race to become loose or even start spinning freely. In such cases, it would be best to replace the entire bearing assembly.

  7. Replace Old Bearings with New Ones:
    The bearings are prone to wear out over time. If your bearing has been used for a long time, chances are it needs replacing.

  8. Prevent Bearings from Corrosion:
    The corrosion can impact longevity in the life of bearings as it impacts the operational efficiency and may also result in machinery breakdown. The only solution to tackle this is to use genuine stainless-steel bearings that can withstand corrosion.
  9. Monitoring Bearing Performance:
    The excessive noise or vibration in the bearing can be a sign of a serious problem that can lead to bearing damage.

  10. Align Machine in Right Way:
    The assembling misalignment can be another reason which can cause failure or breakdown of bearing. The right advice is to always check for proper housing and assembling of bearings to prevent such failures.
Conclusion
The bearing maintenance is an integral thing to ensure that bearings don’t break down before the specified time or life. Since replacement of bearings can cost huge, it becomes important to keep a track of maintenance in the right manner. It is always advisable to follow recommended practices of maintenance to ensure the bearing works right in the optimum way

Market Segments